208 Like 78 Dislike
And that’s a wrap on broken cables. Check out more awesome BuzzFeedBlue videos! http://bit.ly/YTbuzzfeedblue1 MUSIC Elbow Grease Licensed via Warner Chappell Production Music Inc. SFX provided by Audioblocks. (https://www.Audioblocks.com) GET MORE BUZZFEED www.buzzfeed.com/videoteam www.facebook.com/buzzfeedvideo www.instagram.com/buzzfeedvideo www.buzzfeed.com/video www.youtube.com/buzzfeedvideo www.youtube.com/buzzfeedyellow www.youtube.com/buzzfeedblue www.youtube.com/buzzfeedviolet BUZZFEED BLUE Bite-size knowledge for a big world from the BuzzFeed crew. New facts, hacks, and how-to videos posted daily! Subscribe to BuzzFeedBlue today! http://bit.ly/YTbuzzfeedblue1
This is a very easy homemade video, fixing any iPhone 5/6 charging cable that is broken, it works only with the lightning port because the vornish tube that holds the Electric insulation tabe to tight to the cable will not fit through the old charging port. Very easy tutorial, all you need is some electrical insulation tape and the most important thing, the Varnish Tube, which you can find at electric stores for less that $1, Hope this video was useful, and i would very apreciat if you subscribe and share the link. Thank you
A longer than expected video of my attempts to repair a couple of broken iPhone USB lightning cables. The first is a PQI branded cable, which is actually pretty well made, that failed from the cable being kinked over near the lightning plug causing the cable itself to fail, not the cable connections onto the PCB (which is what usually happens), this was going well until I reassembled the connector, which somehow put stress on a PCB pad tearing it off the boar, making the plug useless, so unfortunately that ended up in the bin in the end. The second cable failed at the USB plug itself, the strain relief was not properly installed, causing the wires to be pulled from the PCB. I cut off and re-do the wires onto the plug, and correctly do the strain relief so the wires are not being pulled from the PCB.
In this video I will show you step by step how to fixing iPhone iPad, Lightning USB Cable | Easy Way If you like this video please subscribe to my channel. Music: Electro-Light - Symbolism [NCS Release] Facebook: http://www.facebook.com/mrtubes/ Website: http://www.mrtube.info
The truth inside lightning cable original, this is what i found inside a original iphone cable right from apple. I did my best to open it up to show everybody how it looks. Thanks for whatching, and please subscribe to connect us. Watch this video to get $ 25 free from us: https://www.youtube.com/watch?v=CcNpASQU9_Q
If your Apple's USB Lighting cable is damaged it's easy, cheap and quick way to fix it! All You need is:
- shrinking tube in diameter of 4.8 mm shrinking to 2.8 mm
- any kind of small or medium scissors
- hot air
I recommend using small office scissors to expand shrinking tube, white shrinking tube to match the color of Apple's cord (looks fine for me) and hair dryer to shrink the tube. The heating gun may give you too much heat and Apple's cable may be melted, so be careful with this beast!
If you need help, write a comment.
I will answer you as soon as possible.
If You like this video please consider to SUBSCRIBE my channel.
Follow me on Instagram @cezarylopacinski
Good luck my friends!
Music: Basic Implosion Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License