Instalar Firmware Custom OpenWRT en un Router CISCO Linksys E1200 v2.

autor Diego Jesus Amaya   2 month ago
130 puntos de vista

3 Like   0 Dislike

Instalar Firmware Custom Tomato by Shibby en Router CISCO LInksys E1200 v1. / v2.

Explicacion de como instalar un firmware custom basado en otro firmware custom llamado tomato en un router linksys modelo e1200 versiones 1 y 2. Firmware Stock E1200 v2: Firmware Stock E1200 v1:

OpenWrt installation D-Link DIR-300 / DIR-600

D-Link: DIR-300(B1) / DIR-600(B1&B2) OpenWrt installation Attitude Adjustment 12.09 via emergency interface Detailed instruction: - Download OpenWrt firmware from (you need squashfs-factory.bin): - Prepare your LAN interface by putting static IP address: ( - Before you Power on your router, connect it to the LAN card on your computer - Press and hold reset button and symutaiosly connect your router to the power supply - After 5 seconds, you can release reset button. - Now type in to your browser: - Select file (FILE) that you have downloaded before - Click “Upload firmware NOW” (you might have to repeat this step couple of times) - If everything is done correctly, router will reboot by itself after 90 sec - Put back your LAN IP address to automatic - Now type in to your browser: - Change your default password - Everything is set up and ready :) For more information visit:

OpenWrt: Lan to Wan, D-Link DIR-300/DIR-600

D-Link: DIR-300(B1) / DIR-600(B1&B2) Firmware: Attitude Adjustment 12.09 Before implementing this procedure, make sure your wifi module is enabled. Important (on this video): Port 0 gets WAN function Port 3 remain to have LAN function Other ports will be disabled For more information, please visit

LEDE ADSL and WiFi Setup Linksys WRT1900ACS

Video showing you how to setup your ADSL Internet Connection and WiFi on LEDE Open Source Firmware Firmware downloads

Linksys E1200 / N300 Disassembly / Mod

In this video I go over the process to add an external antenna to the Linksys E1200 (N300) wireless router. This router is very easy to take apart and mod. I only used one SMA antenna adapter for this mod which can be found at the link below. Overall signal strength was improved and so was the distance of signal outward away from the router itself. If you already own this router, for about $10 in parts and only a few minutes of work, it's a good upgrade.

instalar un firmware custom llamado OpenWrt en un Router Linksys E 1200 versión 2.

Firmware Stock E1200 v2:
Firmware OpenWRT E1200 v2:

Comentarios para el video: